Prev / Next / あかぴのChangeLog by rchalow

Plamo-4.73でDVDを焼く[Plamo][Gentoo]

2010-10-16

Plamo-4.73でDVDを焼く [Plamo][Gentoo]

はじめてLinux上でDVDを焼いてみた(笑)
Windowsのソフトより速いし安定感あるな。
CDのisoイメージをDVDに焼いても起動できるのね。

~$ sudo cdrecord -scanbus
Cdrecord-ProDVD-ProBD-Clone 2.01.01a75 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J g Schilling
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
scsibus0:
0,0,0 0) 'ATA ' 'ST380013AS ' '8.12' Disk
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus4:
4,0,0 400) 'ATA ' 'ST380011A ' '3.16' Disk
4,1,0 401) '_NEC ' 'DVD_RW ND-3540A ' '1.22' Removable CD-ROM
4,2,0 402) *
4,3,0 403) *
4,4,0 404) *
4,5,0 405) *
4,6,0 406) *
4,7,0 407) *

~$ sudo cdrecord dev=4,1,0 -data download/livedvd-x86-amd64-32ul-10.1.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a75 (i686-pc-linux-gnu) Copyright (C) 1995-2010 J g Schilling
scsidev: '4,1,0'
scsibus: 4 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-3540A '
Revision : '1.22'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Track 01: Total bytes read/written: 116617216/116617216 (56942 sectors).
~$


blog comments powered by Disqus